Technical Regulation empowered in the Republic of Kazakhstan to ensure the safety of equipment intended for use in explosive atmospheres. IEC 60079 series standards are specific to the scope of equipment which is installed or associated to explosive atmospheres. In the case of this project, IEC 60079 requirements are applicable to locations which have been classified as Hazardous Areas as per project hazardous area classification drawings and documentation. 3GP including equipment selection, installation, inspection, commissioning, preservation, and information provision activities during Phase 4 of the project. Change Notice – MCPlus mechanism for changing QVD allocation if incorrectly assigned and Engineering data attribute changes e.g. voided tags, tag type changes etc. Product certified equipment for use in a potentially explosive atmosphere. A mixture of dangerous substances with air, under atmospheric conditions, in the form of gases, vapors, mist or dust in which, if ignition occurs, combustion may spread to the entire unburned mixture. HAC, Ex Register Database, Project electronic information repository for drawings and information. Quality verification document. Actively support the necessity for Ex equipment assurance activities during pre-commissioning and commissioning phases. Quality Team assurance ends at MC. Ensure Ex equipment special/ specific conditions to be checked during pre-commissioning and commissioning activities as detailed on applicable Ex equipment certificates of conformity are being validated and documented by the Contractor on relevant MCPlus check sheets. Ensure that MCPlus initial validation process is carried out as detailed. Support Contractor personnel as directed by the 3GP Quality Ex Responsible Person. Attend inspections and carry out surveillance activities as requested by the 3GP Quality Ex Responsible Person. Provide the 3GP Quality Ex Responsible Persons with clear, factual, and concise information to support efficiencies related to managing any issues.

Implement and coordinate a process to ensure that sufficient installation checks are carried out and documented in MCPlus for cases where obtrusive works have been carried out post Ex QVD completion e.g. when equipment is removed/ reinstated or if cable terminations are disconnected/ reconnected. Effectively manage any pre-energization Ex initial detailed inspection checks inherited from the pre-MC construction scope ensuring correct allocation of ECS-064-1(B2) Check sheets in MCPlus and oversee effective execution of the inspection activity. Report directly to Ex responsible person • Support SC teams to close any Ex-complacence issues in a timely manner • Work in line with the approved 3GP Ex Work Plan. • Monitor Quality Control procedures relative to Ex compliance activities. • Create clear reporting to be shared with all relevant parties. • Maintain compliance with all applicable policies, procedures, and global standards. • Proactively identify, support, and drive mitigation for safety or environmental issues. • Produce clear formats and clear lines of regular reporting to 3GP Ex RP. • Support Ex SC RP to develop process and procedures to close any emergent issues. Business Partner’s SC and Construction Group Support the health of Ex compliance, and ITR completion progress. • Proactively engage counterparts to share/adopt good practices and identify opportunities for process synergies across project scope. Work closely with SC Ex RP to maintain satisfactory ongoing levels of commination and reporting to close emergent issues. Support area/scope targets and milestones • Ensure that they are engaged and made aware of any emergent issues Systems Completions/ MC Management Team Support the team to achieve timely project milestones and completion dates.

Inspection, Installation, Testing, Inspection & Commissioning of Lighting & Small Power, Fire & Gas, Telecoms and Instrumentation on various Projects throughout the Oil and Gas Industry, and industrial installations, Power Station’s, and LER local instrument room. Extensive knowledge of hazardous area equipment and the criteria for the installation of certified equipment for the appropriate hazardous

Responsible for IEC60079-14 & 17 installation and inspection compliance of the entire Electrical Installation before and after use, including after rig moves and rig-up. Responsible for executing certification, maintenance, record-keeping, and reporting as planned; Maintain all needed documentation, records, and certification of electrical equipment on the rig and campsite, and provide correct and speedy report on the use of the equipment; Perform maintenance and update of all electrical drawings and wiring diagrams; Daily ex inspection of portable diesel tank; Ensure that lock-out and tag-out producers are totally followed at the rig and camp; Performed Grade of Inspection Visual, Closed and Detailed and complete the Ex Inspection Test Reports (Ex ITR) with no outstanding punch list items for prior to energize for all the potentially explosive equipment’s. To access the condition of Electrical, Instrumentation, Telecommunications, Fire and Gas & motor's installations in hazardous areas to ensure that it is installed and is maintained in a satisfactory condition.

CONSTRUCTION OF PU-760 CAUSTIC CARRYOVER ELIMINATION, CLEAN WATER PUMP INSTALLATION, PRODUCED WATER HANDLING UNIT 200 MANAGEMENT OF OIL RE-HEATING AND EXPORTING INSTALLATION OF AIR COOLERS IN THE CRUDE RUNDOWN SYSTEM EA-203 H, A, J HP STEAM BOILER PU-9147 INSTALLATION. - GOOD KNOWLEDGE OF USING OF MAIN TOOLS FOR QC MAINTENANCE /, INCLUDING INSPECTION OF CMC TESTING PLANS (PROTOCOLS, ACTS) AND PROCEDURES. GOOD KNOWLEDGE OF ROK REGULATIONS AND STANDARDS. - COOPERATION WITH EX (EXD; EXE; EXI; EXP) INSPECTORS BY WORK LOCATIONS. - COMMISSIONING ACTIVITIES RELATED TO INSTRUMENTATION INCLUDING PROCESS CONTROL & ESD SYSTEMS, FIRE & GAS SYSTEM, HVAC, RADIO COMMUNICATION & PUBLIC ADDRESS/GENERAL ALARM SYSTEMS; - I HAVE WORKED WITHIN COMMISSIONING, QA/QC AND EX INSPECTION ROLES. I’VE GAINED VALUABLE EXPERIENCE IN POWER GENERATION, BATTERY SYSTEMS, POWER DISTRIBUTION, HAZARDOUS AREA EQUIPMENT, UPS SYSTEMS AND MCC SYSTEMS. - REVIEWING CONTRACTOR ITP’S, ITR’S AND ENDORSING VENDOR DOCUMENTS IN RESPECT OF QUALITY MANAGEMENT. - VERIFYING INSTALLATION MEETS THE REQUIRED STANDARD IEC 60079. - WORKING CLOSELY WITH MECHANICAL COMPLETIONS AND TCO INTEGRATED COMMISSIONING TEAMS TO COMPLETE AREA WALK-DOWNS. - INSTALLATION OF ONSHORE HAZARDOUS AREA/ EX EQUIPMENT. - REVIEW PROJECT DRAWINGS, P & ID DATA SHEETS & SPECIFICATIONS.

I HAVE BEEN INTERESTED IN WORKING FOR THIS ORGANIZATION. AS I ENCLOSE MY RESUME AS A FIRST STEP IN EXPLORING THE POSSIBILITIES OF EMPLOYMENT WITH POWER AS WELL AS OIL & GAS PROJECTS. MY MOST RECENT EXPERIENCE WAS WORKING IN KASHAGAN EXPERIMENTAL PROJECT WITH AGIP, AT KASHAGAN OFFSHORE (D-ISLAND). I AM RESPONSIBLE FOR THE OVERALL E &I CONSTN1CTION-SPECIALIZED IN INSTRUMENTATION, INCLUDING THE QUALITY ASSURANCE/QUALITY CONTROL. - CHECKING THE INSTALLATION OF ELECTRICAL EQUIPMENT AND TESTING OF ALL PROJECT RELATED APPARATUS AND CABLES. - CORRECTIONS, CORRECTIVE ACTIONS IN DRAWINGS (AS BUILT), DOCUMENTATIONS, WIRING DIAGRAMS. - DELIVER PACKS OF AS BUILT DOCUMENTS TO AGIP QC DEPARTMENT. - CONTROL OF THE MAIN REQUIREMENTS SUPPLYING QUALITIES, INCLUDING INSPECTIONS PLANS AND ITP TESTS. AUDIT, REPORTS AND TASK OF DOCUMENTATIONS FOR CLIENT APPROVAL. - WORK WITH TECHNICAL DOCUMENTS (RUSSIAN & ENGLISH): ESSENTIAL DRAWINGS, SINGLE LINE DIAGRAMS, CHECKOFF LISTS, PROCEDURES, PASSPORTS, INSTRUCTIONS, REPORTING DOCUMENTS, CERTIFICATES ETC. - CHECKING THE INSTALLATION IN ACCORDANCE WITH DESIGN DOCUMENTATION AND ALL INSTALLATION SPECIFICATIONS HAVE BEEN ADHERED. WORKING THROUGH ACCEPTANCE DOCUMENTATION. (PROTOCOLS, REPORTS) HEADING TOWARDS THE GOAL OF COMPLETION HANDOVER TO CLIENT ACCEPTANCE. - FTNAL CHECKS ON VARIOUS MASTER POWER U PS SYSTEMS. INSTALLING AND COMMISSIONING OF NEW AEG TELECOMS AND PLAT FORM PA SYSTEM; TRANSBOLIC UPS SYSTEMS AND FIRE AND GAS SYSTEMS AND CARRYING OUT FULL AND PERSONAL ISOLATION ON LAURENCE SCOTT/ MERLIN GERIN LV/HV CONTROL CUBICLES, ALSO PERFORMING CURRENT/VOLTAGE TESTING OF MERLIN GERIN/ WALLACETOWN OVERLOADS, RELAYS, RED LINE OF SINGLE LINE DRAWINGS. - CARRYING OUT OF EX INSPECTION AND FINAL INSPECTION CHECKS ON HAZARDOUS AREA EQUIPMENT AND INSTRUMENTATIONS. - RESPONSIBLE FOR THE E&I OFFSHORE CAMPAIGN TEAM TO ENSURE THAT ALL CONSTRUCTION ACTIVITIES ARE COMPLETED TO THE REQUIRED STANDARDS AND ON SCHEDULE. - DAILY DUTIES INCLUDE ORGANIZING THE EX HAZARDOUS AREA INSPECTION ACTIVITIES. CREATION OF PUNCH LISTS AND FINAL SIGN OFF AND CLEARING OF DEFECTS FOUND. ATTENDING DAILY PROGRESS MEETINGS AND WORKING WITH THE MECHANICAL COMPLETION DEPARTMENTS TO MAINTAIN THE PROJECT MILESTONES.

TESTING OF HV CABLES WITH АИД- 70М, MEGGER MIT-1020/2, MIT-300 - TESTING OF LV CABLES WITH MEGGER 1587 - WORKING AND TESTING (FROM “A” TO ISOLATION “B” AFTER PIPE ISOLATION) ON TRACE HEATING CABLES AND THERMOSTAT BY USING OF ISOMETRIC & SINGLE LINE DIAGRAMS (RAYCHEM; THERMON; TERMINATOR)

-TESTING OF HV CABLES WITH АИД- 70М, MEGGER MIT-1020/2, MIT-300 - TESTING OF LV CABLES WITH MEGGER 1587 - WORKING AND TESTING (FROM “A” TO ISOLATION “B” AFTER PIPE ISOLATION) ON TRACE HEATING CABLES AND THERMOSTAT BY USING OF ISOMETRIC & SINGLE LINE DIAGRAMS (RAYCHEM; THERMON; TERMINATOR)

- ELECTRO SUPPLY SYSTEM INSTALLATION - MAINTENANCE & INSTALLATION OF ELECTRIC PLANT - CABLE LINE LYING - CONNECTION OF DB’S AND POWER BOARDS - MAINTENANCE AND TESTING OF HV CABLES - MAINTAIN OF PERFORMANCE REPORTS OF ELECTRIC PLANT MAINTENANCE

- INSTALLATION & TERMINATION CABLES - FIRE ALARMS INSTALLATION - FIRE SENSORS INSTALLATION - EMERGENCY SPEAKER INSTALLATION - EMERGENCY POINT INSTALLATION; - SMOKE SAFETY DETECTOR INSTALLATION; - EMERGENCY LAMP INSTALLATION.

PERFORMING GENERAL ELECTRICAL INSTALLATION ACTIVITIES AND TESTING

БН, Разработка месторождения нефти и газа